Adesso Scanner 3200 series User Manual

LASER BARCODE SCANNER  
USER'S GUIDE  
NUSCAN 3200 series  
 
Table of Contents  
1. Limited Warranty ............................................................................. 1  
2. Introduction .................................................................................... 2  
3. Contents......................................................................................... 3  
4. Barcode Symbologies ....................................................................... 3  
5. Product Introduction ........................................................................ 4  
6. Installation...................................................................................... 4  
Connection ..................................................................................... 4  
Test Scanning.................................................................................. 5  
Maintenance ................................................................................... 5  
7. Scanning Mode Selection .................................................................. 6  
8. Beeper Mode Selection..................................................................... 7  
9. Default Parameters .......................................................................... 8  
10. Barcode Scan Field........................................................................... 9  
11. Technical Specifications ...................................................................10  
12. Programming Guide.........................................................................11  
13. Trouble Shooting.............................................................................11  
14. Product Support..............................................................................12  
 
Note:  
This manual should only be used to make changes in the configuration of  
the scanner for specific applications.  
The NUSCAN 3200 Series scanners are ready to scan most kinds of barcodes. This  
laser barcode scanner does not require software or drivers to operate. The scanner  
enters data as keyboard data.  
If you are unsure of the scanner configuration or have scanned the incorrect codes,  
please scan the “Reset Configuration to Defaults” barcode. This will reset the scanner  
to its factory settings.  
1. Limited Warranty  
No warranty of any kind is made in regard to this material, including, but not limited to,  
implied warranties of merchantability or fitness for any particular purpose. We are not  
liable for any errors contained herein or for incidental or consequential damages in  
connection with furnishing, performance or use of this material. We shall be under no  
liability in respect of any defect arising from fair wear and tear, willful damage,  
negligence, abnormal working conditions, failure to follow the instructions and  
warnings, or misuse or alteration or repair of the products without written approval.  
No part of this document may be reproduced, transmitted, stored in a retrieval system,  
transcribed, or translated into any human or computer or other language in any form  
or by any means electronic, mechanical, magnetic, optical, chemical, biological,  
manual or otherwise, except for brief passages which may be quoted for purposes of  
scholastic or literary review, without express written consent and authorization.  
General handling precaution  
DO NOT DISPOSE IN FIRE.  
DO NOT USE OR STORE SCANNER IN HUMID AREAS  
DO NOT DROP THE SCANNER  
DO NOT TAKE APART WITHOUT PROPER AUTHORIZATION  
Download from Www.Somanuals.co1m. All Manuals Search And Download.  
2. Introduction  
The NUSCAN 3200 Laser Barcode Scanner combines the best scanning performance  
and value. NUSCAN 3200 comes in multiple modes to handle any task. Its flexible  
architecture gives users different configurations to choose from, with different  
combinations of communications.  
With its rugged high class ID design and ergonomic styling, NUSCAN 3200 offers  
superior service life and reduces user fatigue. In addition to 80 scans per second  
performance, it is equipped with RIOTEC Laser Engine which is no moving parts inside,  
soft fixed laser light, high reliability, linear receiver, and long scanner lifetime.  
Moreover, NUSCAN 3200 window covered with rubber that fully protects product and  
increases shock resistance.  
Boasting several compatible interfaces (USB, K/B and RS-232) and numerous  
configurations, the scanner is a powerful and reliable handheld scanner without  
compromise.  
2
 
3. Contents  
The NUSCAN 3200 Long Range Laser Barcode Scanner package should contain:  
NUSCAN 3200 Long Range  
User’s Guide  
Laser Barcode Scanner  
4. Barcode Symbologies  
Barcodes are symbols consisting of a series of bars and spaces which can be applied  
to packages, cartons, bottles and other commercial products. The bars and spaces in  
each symbol are grouped in such a way to represent a specific ASCII character or  
function. The interpretation of these groups is based on a particular set of rules called  
Symbologies. Various symbologies have been developed for particular applications.  
Some examples are shipping and receiving, manufacturing, retail, healthcare,  
transportation, document processing and tracking, and libraries.  
NUSCAN 3200 Series Scanners can read most of the popular barcode symbologies  
including Code 39, Code 93, Code 128, Code11, Interleaved 2 of 5, UPC-A, UPC-E,  
EAN/JAN-8, EAN/JAN-13, Codabar, UPC/EAN/JAN, MSI,……  
3
 
5. Product Introduction  
Buzzer  
Exit Window  
Handle  
Trigger  
When a barcode is successfully decoded, the blue LED light of the scanner will turn on  
and off and the scanner will beep once. If the barcode is not successfully read, the  
LED will show red and the buzzer will not sound.  
6. Installation  
Insert the plug on the free end of the Communications Cable into the appropriate  
connector on the host as below described:  
a. USB Connection  
Host  
b. K/B Connection  
4
 
c. Serial Port (RS-232) Connection  
NOTE: For Serial port (RS-232), please plug the power connector of 5V power adapter  
to RS232 cable.  
1
Be sure that Host computer is turned off.  
Ensure that all connections are secure.  
Turn on your Host.  
Aim the scanner at a barcode. Ensure that the scanner is in trigger mode  
(default), and press the trigger.  
1.  
2.  
3.  
4.  
On successful decode, the blue LED light will turn on and off and the scanner will  
beep once.  
Tip  
Do not hold the scanner directly over a barcode at 90˚. Scanning light bounces  
directly back into the scanner from the barcode label is known as specular reflection  
which will create a "dead zone" where decoding is difficult. Practice a few times to find  
what range of angles works best.  
Maintenance  
Cleaning the scan window is the only maintenance required. A dirty window may  
affect scanning accuracy.  
Wipe the scanner window gently with a lens tissue or other material suitable for  
cleaning optical material.  
Do not spray water or other cleaning liquids directly onto the window.  
5
 
7. Scanning Mode Selection  
Trigger Mode (Default)  
The scanner becomes inactive as soon as the data is  
transmitted. It must be triggered to become active again.  
Continuous Mode  
When set this code, laser light is always ON. Can read  
barcode continuously after code transmission.  
Pulse Mode  
When set this code, laser light will flash when standby. Can  
read barcode continuously after code transmission.  
Reset Mode  
The reading of the "RESET” label turns all the parameters  
back to default values.  
Download from Www.Somanuals.co6m. All Manuals Search And Download.  
8. Beeper Mode Selection  
(Deafult)  
Reset Mode  
The reading of the "Reset Configuration to Defaults”  
label turns all the parameters back to default values.  
7
 
9. Default Parameters  
These tables give the default settings of all the programmable parameters.  
DEFAULT VALUES OF OPERATING PARAMETERS  
Function  
Scanning Mode Selection  
Message/Block mode selection  
Good read beeper tone selection  
Default Values  
Trigger mode  
Message  
On  
DEFAULT VALUES OF K/B PARAMETERS SETTING  
Function  
Keyboard type selection  
Message terminator  
Default Values  
IBM PC/AT USA  
Enter/ carriage  
Return  
DEFAULT VALUES OF RS-232 (SERIAL) COMMUNICATION PARAMETERS  
Function  
Handshaking protocol  
Baud rate  
Default Values  
None  
9600  
8
Data bit  
Stop bit  
1
Parity  
None  
CR  
Message terminator selection  
DEFAULT VALUES OF USB COMMUNICATION PARAMETERS  
Function  
Keyboard Type  
Message terminator  
Default Values  
US Keyboard  
Enter  
8
 
10.Barcode Scan Field  
Depth of Field (Up to 42 cm): Based on Symbol’s Standard Code 39 PCS=0.9  
lable and 600 lux environment and there are +/- 1 cm tolerance  
9
 
11. Technical Specifications  
OPERATIONAL  
Light Source  
650nm Laser Diode  
Linear CCD  
Optical System  
Scan Speed  
80 scans per second  
4 mil  
Minimum Bar Width  
Print Contrast  
Reading Indicators (LED)  
Beeper Operation  
System Interfaces  
PHYSICAL  
45% or more @ UPC/EAN 100%  
Two-color LED (blue and red)  
ON/OFF  
USB, K/B or RS-232  
Height  
7.16 Inches (182 mm)  
3.66 Inches (93 mm)  
2.40 Inches (61 mm)  
Depth  
Width  
Weight  
0.28 LBS  
6 ft (2m)  
(130g +/- 5g) (No cable)  
Cable  
POWER  
Input Voltage  
Power  
5 VDC +/- 0.5 V  
20mA @ 5V (standby current)  
60 mA @ 5V  
Operating Current  
Regulation  
FCC Class A & CE  
ENVIRONMENTAL  
Temperature-Operating  
Temperature-Storage  
Humidity-Operation  
0˚C ~ 50˚C (32˚F ~ 122˚F)  
-20˚C ~ 60˚C (-4˚F ~ 140˚F)  
10% ~ 85% ( non-condensing)  
Humidity-Storage  
Light Levels  
Shock  
5% ~ 95% ( non-condensing)  
Up to 36,000 Lux  
1.5m drop onto concrete  
10  
 
12.Programming Guide  
If you need to make changes in the configuration of the scanner for specific  
applications, a full Programming Guide can be downloaded at:  
13.Trouble Shooting  
a. Problem: Nothing happens when you follow the operating instructions.  
Possible Cause  
Possible Solution  
Interface cables are Check for loose cable connections.  
loose.  
b. Problem: Light comes on, but symbol does not decode.  
Possible Cause  
Possible Solution  
Scanner is not  
programmed for the  
correct bar-code  
type.  
Please refer User’s Guide and be sure to select the  
correct interface selection and ensure that the  
scanner is programmed to read the type of barcode  
you are scanning.  
Barcode symbol is  
unreadable.  
Check the symbol to make sure it is not de-faced. Try  
scanning test symbols of the same barcode type.  
Distance between  
scanner and barcode  
is incorrect.  
Move the scanner closer to or further from the  
barcode.  
c. Problem: Symbol is decoded, but not transmitted to the host.  
Possible Cause  
Possible Solution  
Scanner is not  
programmed for the  
correct host type.  
Please make sure the scanner is configured to the  
appropriate host type by scanning the corresponding  
programming barcode on the User’s Guide.  
 
11  
d. Problem: Scanned data is incorrectly displayed on the host.  
Possible Cause  
Possible Solution  
Scanner is not  
Be sure proper host type is selected.  
programmed to work  
with the host.  
For RS-232, ensure the scanner’s communication  
parameters match the host’s settings.  
For keyboard emulation configuration, ensure the  
system is programmed for the correct keyboard type,  
and that the CAPS LOCK key is off.  
Be sure editing options (e.g. UPC-E to UPC-A  
Conversion) are properly programmed.  
14.Product Support  
Website Support:  
We have listed most of our FAQ (Frequency Asked Questions) at  
If it does not help you to resolve your product issues, you may also contact Adesso  
Technical Support by email or telephone support during 9:00AM to 6:00PM PST from  
Monday through Friday.  
Email Support:  
Email your request to [email protected] and include the following information:  
Your Name & Contact email address & telephone number  
Model number & Serial number of your Adesso product  
Operating System  
Description of how you installed and set up your Adesso product  
Description of your technical difficulty  
Phone Support:  
(800) 467-1195  
Before you call us for Tech-Support, please provide below information:  
Your Name & Contact telephone number  
Model number & Serial number of your Adesso product  
Operating System  
Description of how you installed and set up your Adesso product  
Description of your technical difficulty  
 
12  

3Com Network Router WL 603 User Manual
3Com Switch 3C16491 User Manual
Acer Laptop TravelMate 360 User Manual
Agri Fab Spreader 45 0364 User Manual
Aiphone Stereo Amplifier PB 1 User Manual
Aiphone TV Mount SBX 2BH User Manual
Air King Ventilation Hood 100 CFM User Manual
Allied Telesis Switch Layer 3 Switches User Manual
BB Electronics Computer Hardware 232PCI1A User Manual
Beckett Weather Radio 7600WTM User Manual